Low Voltage Cable and Harness Test Systems

Low Voltage Cable Testers M2Z, M3Z, M4
All testers ship with standard operating software, probe.

• Scan for Continuity (Opens, Shorts, Miswires, Intermittent Connections)
• Measure above, resistance, and check quality of intended connections and non-connections (M3-series and M4)
• Measure all above, capacitance, twist pair relationships, wire/cable length, and length to fault (open/short). (M4)
• Dynamic, graphic-rich Netlist/Wiring display:
• Confirm diode orientation
• Set asymmetric tolerances in absolute or %
• Over 500 connector graphics included
• Out-of-the-box, customizable & printable color reports
• Multilingual navigation screens, reports & labels
• PASS/FAIL check or diagnostic GUI screens - your choice
• Quick-change, automatically-detected CB boards:
• Over 60 different stock boards accommodate well over 200 standard connector types
• Universal CB8 board for prototyping and circular connectors, or CB28 for bare wires
• All control modules, except the M2Z, handle cables of up to 76 conductors and are expandable:
• Layer one or more 128-point expansion modules under control module, to accomodate larger cables
• M2Z control module handles cables of up to 64 conductors and is not expandable